Använder du en mobil enhet ? - dubbelklicka i detta område, så blir texten större ! Do you use a mobile unit ? - For larger text, doubleclick in this area !
Make a Power Cord Belt – 2 easy steps !
Do you need a belt fast?
Do your pants fall down?
- How to make a modern, stylish waistband of an ungrounded electric cord!
Tired of buying straps that never really fit your pants, or that break down after just a few months?
In that case, you can take an old ungrounded power cord that lies and scrap at home in any corner, and use it as a life belt.
It will be both modern, stylish and durable:
Picture of our strap, made of ordinary ungrounded electric cable
.
Here’s what you need to make the belt:
An ordinary ungrounded power cord (with two conductors) and a cutting pliers
.
Do this
1. Begin by cutting off the plug:
.
2. Also cut the cord at the opposite end:
.
Make sure you get the right length of the power cord:
.
Now insert the power cord into the shelves of the pants:
.
Plug the power cord into all the hobs around your life, just as you would with a regular belt:
.
Feel that the cord fits comfortably and neatly around the waist:
.
Finish by making a couple of knots / knots, where you think it will look great:
.
Here is the power cord running on the hobs around the waistband:
.
This is what the new waistband looks like when the pants are on:
.
Information about this waistband
Buying straps feels like the most unnecessary expense you have, next to laundry detergent. Therefore, you can save on the cost of life belts by taking an old electric cord that you still do not use and making a life belt of it.
The strap becomes stylish, modern, easy to put on and it lasts for many, many years. And if it breaks, just take a piece of power cord and make a new belt!
We have also tried to use grounded power cable (with three conductors), but unfortunately it was not as easy to connect.
Good luck !
_______
Do you need a belt quick ?
Does your pants fall off ?
- This is how you make a modern, stylish belt out of an ungrounded electric cord !
Tired of buying expensive straps that never really fit your pants, or that come apart after just a few months ?
In that case, you can take an old ungrounded power cord that kicks around at home, and use that as a belt.
It will be both modern, stylish and durable:
Picture of our belt, made of an ordinary ungrounded electric cable
.
Here’s what you need, to make this belt:
An ordinary ungrounded power cord (with two conductors) and a cutting pliers
.
This is how to
1. Begin with cutting off the plug:
.
2. Also cut the cord at the opposite end:
.
Make sure you get the right length of the cord:
.
Now insert the cord into the straps of the pants:
.
Plug the power cord into all the hobs around your waist, just as you would with a regular belt:
.
Make sure that the cord fits comfortably and neatly around the waist:
.
Finish by making a couple of knots, where you think it would be great:
.
Here is the power cord, running around the waist:
.
This is what the new belt looks like when the pants are on:
.
Information about this belt
Buying belts feels like the most unnecessary expense one can have, next to bying washing detergent. Therefore, you can save the costs of bying belts by taking an old electric cord that you don’t use anyway and make a belt of it.
The belt becomes stylish, modern, easy to put on and it lasts for many, many years. And if it breaks, just take another piece of power cord and make a new belt !
.
We have also tried to use grounded power cable (with three conductors), but unfortunately it was not as easy to tie together.
Good luck !
If you discover more smart ways to make belts, or other practical accessories, feel free to comment HERE >
Du kanske också gillar: / You may also like:
SPARA I FIL / SKRIV UT, HÄR > - SAVE TO FILE / PRINT, HERE >